Luxurious Single Handle Hole Swivel Kitchen Sink Faucets Mixer Taps

Abnormal Phenomena

Possible Reasons

Treatments

small water output

1. 1.The blockage of bubble head filter
2. 2.The blockage of litters in trim
3. 3.The pump is smaller or is blocked
4. 4.The quantity of water or the pressure of water is not enough

1. 1.Dismantle the bubble head and clean the filter
2. 2.Dismantle the heart and clean the litters
3. 3.Exchange or clean the pipe
4. 4.Increases the quantity or pressure of water

There is a leak or no water in the heart position.

1. 1.The shaft of the heart broke
2. 2.The plastic chip inside the heart broke
3. 3.The ceramics in the heart is damaged
4. 4.The heart nut is not locked tightly
5. 5.The plastic shell of the heart is damaged or is parted
6. 6.The heart rotation does not work or is blocked.

1. 1.Exchange the heart
2. 2.Exchange the heart
3. 3.Exchange the heart
4. 4.Tight up the nut firmly;
   Exchange the heart

The bubble head or the outlet leaks

1. 1.The heart is bad
2. 2.The equipment is bad
3. 3.The partition leaks
4. 4.The bubble head is not fit tightly
5. 5.The water stop pad is not installed
6. 6.The outlet inner teeth are damaged or broke open

1. 1.Exchange the heart
2. 2.Reconfigure it
3. 3.Change the body
4. 4.Tight up the bubble head
5. 5.Add the water stop pad

The inlet position leaks

1. 1.The inlet nut broke open
2. 2.The inlet inner teeth are bad or is damaged
3. 3.The inlet teeth is much smaller
4. 4.The nut is not fitted with O shaped circle or the nut is not fitted correctly
5. 5.O-ring or the pad is aging
6. 6.The pad is not fitted with or the pad is damaged
   The inlet broke pen;

1. 1.Exchange a good nut
2. 2.Change the body
3. 3.Exchange the body or do a rework
4. 4.Add the O-ring or require it to be in place
5. 5.Add a good pad
6. 6.Exchange good quality inlet

The handle gets loose

1. 1.The nuts on the handle are not fixed tightly
2. 2.The handle teeth loosed
3. 3.The wiggling scale of the heart shaft is larger
4. 4.The handle does not fit the central shaft
5. 5.The inside diving gear is damaged

1. 1.Tight the nut
2. 2.Exchange the handle
3. 3.Exchange the heart
4. 4.Exchange the matching handle or central shaft
5. 5.Exchange a doo quality handle

Feel tight for the handle

1. 1.The heart part or the nut is fixed too tightly
2. 2.Fixed much tighter
3. 3.Feel tight for the heart;

1. 1.Loose the fixed nut for about 10nm-15nm
2. 2.Exchange the heart
3. 3.Slightly elevate the handle or until it does not get stuck

The surface is not satisfying

1. 1.Blister, peeled, become yellow, wrinkle, crack, scratch hands, a lot pits,pinhole porosity, material compaction, shape distortion, hurts, scratching, paint removing, be oxidized,become black

1. 1.Do not use the cleaning agent with acidity and the abrasiveness
2. 2.Do not use the cleaning ball to clean the faucet surface

Water leaks from the faucet head

1. 1.Incorrect installation
2. 2.The accessory is broken or cracked
3. 3.The handle is broken.

1. 1.Reinstall
2. 2.Replace the accessory
3. 3.Replace the faucet head

Water leaks from the tube.

1. 1.Disengage, deform, break, tear, crack

1. 1.Replace the tube

Water leaks from the body.

1. Water leaks from sand hole, flaw and clapboard

1. 1.Replace the body

Lack of accessory

1. 1.Forget to put in the package
2. 2.Get lost while installing

1. 1.Add the missing accessory
2. 2.Pay attention while installing

Water leaks from the joint of faucet head and tube

1. 1.The O-ring, or water stop gasket hasn′t been installed or the O-ring is too small
2. 2.The teeth inside and outside is broken or cracked

1. 1.Install the O-ring, water stop gasket or standard O-ring
2. 2.Replace the high quality one

Water leaks from the five-way end cap or teeth tube joint

1. 1.The water stop tape isn′t sealed well

1. 1.Install the sealing tape well

Time lapse faucet can′t stop outflowing or takes long time to outflow.

1. 1.Heart in bad condition
2. 2.The press between valve body and valve core is not enough
3. 3.The time lapse spring is not strong enough to get the water out in time

1. 1.Replace the heart
2. 2.Reinstall it tightly
3. 3.Replace the spring and adjust the time of outflowing

Water leaks from time lapse faucet

1. 1.Water stop gasket is broken
2. 2.The heart nut gets loose or is skewed
3. 3.The joint is not tight
4. 4.The heart can′t stop water outflowing

1. 1.Replace the water stop gasket
2. 2.Reinstall it with glue to keep it tight
3. 3.Reinstall it with glue to keep it tight
4. 4.Clean up the impurities inside and check the heart gasket ring
5. 5.Replace it if it is broken or without enough hardness (standard: 85)